The Online Dealer for Briggs and Stratton Engine Parts in the UK, Ireland and Europe.....
Briggsandstratton parts UKBriggs&stratton parts UK
Briggs&Stratton uk
Briggsandstratton parts UKBriggs&stratton parts UK

spacer imagespacer image



Briggs and Stratton Vertical 7HP and above Side Valve Engine Spare Parts

Briggs&Stratton uk | Single Cyl. Vertical Crankshaft Over 7 HP Spare Parts  |  Briggs and Stratton Vertical 7HP and above Side Valve Engine Spare Parts

Briggs and Stratton 7HP and 8HP Vertical Crankshaft Side Valve Engine Spares

This series of engines are usually to be found on ride on lawnmowers but can also be found on industrial walk behind mowers, rotorvators and other equipment.

They have side valve (L-Head) configuration with the spark plug near the centre of the cylinder head.
The head is flat with vertical cooling fins and often has a flat, pressed steel cover plate over most of the fins
with a hole for spark plug access

The carburettor and air filter are fitted to the L/H side of the engine (viewed from behind) with the exhaust emerging from below the carburettor manifold.
There are electric start and pull start versions. Some of these engines have both.

The Model, Type and Code numbers are stamped into the pressed steel cowling just above the spark plug location
and are typically 170702, 170707, 171702, 190702, 190707, 196707 etc.
Engines whos model begins with 17 are 7HP, those begining 19 are 8HP.

Briggs and Stratton 10HP to 13HP Vertical Crankshaft Side Valve Engine Spare Parts

This series of engines are usually to be found on ride on lawnmowers but can also be found on industrial walk behind mowers, paddock cleaners (poo pickers) and other equipment.

They have side valve (L-Head) configuration with the spark plug near the centre of the cylinder head.
The head is flat with vertical cooling fins and often has a flat, pressed steel cover plate over most of the fins
with a hole for spark plug access

The carburettor and air filter are fitted to the L/H side of the engine (viewed from behind) with the exhaust emerging from below the carburettor manifold.
They are usually electric start but there are also pull start versions. Some of these engines have both.

The Model, Type and Code numbers are stamped into the pressed steel cowling just above the spark plug location or on a small plate rivited to the top and are typically 220707, 251707, 280707, 281707, 286707, 28M707, 280T707, etc.
Engines whos model begins with 22 are 10HP, those begining 25 are 11HP, those starting 28 are 11.5HP - 13HP depending upon particular model and type.

Briggs&Stratton uk | Single Cyl. Vertical Crankshaft Over 7 HP Spare Parts  |  Briggs and Stratton Vertical 7HP and above Side Valve Engine Spare Parts

©copyright 2005 G.Campbell. All rights reserved
(see terms and conditions)

spacer image